123.hp.com/hp-ink-tank-2131

 

123 HP Ink Tank 2131 Setup Printer Support

HP printers give you Vibrant Graphics and Crisper, Darker Text, and borderless and fade resistant photos and printouts that last up to 22 times longer. Coming up short on ink in the middle of printing can be alarming. This present printer's Transparent Ink Tank lets you effortlessly screen the ink levels and refill as and when required. This printer accompanies Resealable ink bottles that make it advantageous to refill the ink tank at whatever point required. These bottles encourage a No-waste and Mess-free refilling system.

Got tasks and assignments that require a considerable measure of printing? HP Ink Tank printer gives you a chance to print out thousands of pages without harming your pocket. Get up to 8,000 pages (shading) or 6,000 pages (black) at an amazingly low cost-per-page. Stressed over making a wreck when refilling and squandering ceaselessly the ink? With HP Ink Tank printer, you can advantageously reestablish ink levels with our spill-proof resealable bottle and HP's unique tank system that makes ink administration a simple errand.

123 HP Ink Tank 2131 Setup Instructions

  • The HP Ink Tank 2131 arrives in a rectangular box totally sealed on every one of the sides.
  • Begin the unwraping procedure by evacuating every one of the tapes, stickers, and packing materials covering the bundle.
  • Place the box evenly downwards and haul the printer out of the box by pulling the cover in which the machine is available.
  • Evacuate every one of the tapes that are sealed over the HP Ink Tank 2131 arrangement printer. Open the exterior door and evacuate the tapes and the packing material that are available under the printhead access door.
  • Cardboard sheets can be found inside to shield from any outside harm. Close the access door.
  • Place the printer on a flat surface. Ensure that it is avoided dust and heat.
  • Interface the power cable to the rear side of the 123 HP Ink Tank 2131 Setup printer and plug the opposite end to an electrical outlet. Try not to associate the USB as of now.
  • Switch on the printer. Presently, the ink tanks must be filled.
  • Before filling the ink tanks, a few alerts must be remembered.
  • Open the bottle just while filling the ink tanks. In the event that kept open for quite a while, at that point the ink may dry up soon.
  • Fend off youngsters from these ink bottles since they can make issues if uncovered direct skin.
  • Keep the ink bottles in a cool and dry place. Open the ink tank lid and expel the plug from the black tank.
  • Evacuate the cap and force the seal to expel it. Try to arrange the seal precisely.
  • Presently supplant the cap on the bottle with the nozzle opening and fix it. Flip around the bottle and place it over the tank spout.
  • Push the bottle downwards gradually to give the ink a chance to drain into the tank and see that the ink tank is filled till the fill line.
  • After the tank is filled, pull the ink bottle up. Rehash similar strides to fill the other ink tanks and close the lid.
  • Introduce the printheads the way it is specified in the manual. Close the outside entryway in the wake of installing the printhead.
  • Adjust the printheads in light of the fact that it is important to get the best quality through it. Press the Resume catch for 3 seconds. Lift the scanner lid.
  • Place the alignment page with the print side down and close the scanner lid. Press the Start Copy Color catch from the control panel and sit tight for the alignment to finish.
  • Raise the input tray and load a greatest of 60 papers into it. Alter the paper width guides by sliding it to the extraordinary left.
  • On the base side, haul out the output tray and raise the tray extender.
  • After the hardware setup, introduce the HP Ink Tank 2131 Printer software and begin printing.